3M™ Betapure™ AU Series Filter Cartridge

22 
  • Rigid structure provides consistent and reproducible contaminant reduction
  • Excellent reduction of deformable contaminants for consistent effluent quality
  • Gasket design reduces by-pass from poor to damaged seals
  • Rigid structure reduces cartridge by-pass and unloading for consistent filtration throughout product lifecycle
 Mere
Se alle detajler
Mikron-vurdering
Micron_Rating
Afslut ændring
End_Modification
Samlet bredde (metrisk standard)
Overall_Width_Metric
22 Se alle produkter 
 Mikron-vurdering, Afslut ændring  Samlet bredde (metrisk standard)
Alle modeller
Luk
Specifikationer
Afslut ændring
Code 7 Bayonet Lock, No End Modifcation, No End Modification
Brancher
Industrielt
Filtermateriale
Polyolefin
Filtertype
Dybde
Kornstørrelse
10 Micron
Maksimal driftstemperatur (Celsius)
125 Degree Celsius, 80 Degree Celsius
Mikron-vurdering
10 μm, 100 μm, 125 μm, 160 μm, 175 μm, 30 μm, 5 μm, 50 μm, 75 μm
Paknings-/O-ringsmateriale
EPR, Polyethylen
Produktserie
AU, Betapure™ AU Series
Serie
AU, Betapure™ AU Series
Stk. pr. karton
15
Produktdetaljer
  • Rigid structure provides consistent and reproducible contaminant reduction
  • Excellent reduction of deformable contaminants for consistent effluent quality
  • Gasket design reduces by-pass from poor to damaged seals
  • Rigid structure reduces cartridge by-pass and unloading for consistent filtration throughout product lifecycle
  • Low pressure drop provides long service life while using smaller filter housings

3M™ Betapure™ AU Series Filter Cartridge is our rigid structure, which delivers superior on-stream service life for a wide-range of applications. It comes in various grades with absolute reduction ratings. The controlled pore size of the filter matrix provides absolute distinction between cartridge grades for accurate and consistent filtration.

Use 3M™ Betapure™ AU Series Filter Cartridge for precise contaminant reduction, consistent effluent quality and superior on-stream service life for a wide-range of applications.

Our wide range of media grades allows you to precisely tailor performance characteristics and achieve optimal filtration economy by enabling defined reduction cut-off points by particle size. We manufacture Betapure AU Series Filter Cartridges using state-of-the-art technology to produce a clean, rigid, filter structure that generates reproducible effluent consistency. The filter matrix is constructed using long bi-component fibres, each fibre having an inner core and an outer sheath. Betapure AU series filters are available in two bi-component fibre structures, polypropylene/polyethylene or polyester/co-polyester, to provide a range of compatibility for your particular process. 3M Betapure AU Series Z11 and Z13 filter is available with a polypropylene media insert and glass paper insert respectively.

In manufacturing, 3M Betapure AU Series Filter combines stringent material quality assurance standards, exacting in-process controls along with extensive final product testing and verification. The results are products that provide consistent filtration from lot-to-lot, filter-to-filter. The bi-component fibres of the filter matrix are thermally bonded by exploiting the difference in melt temperatures of the two fibre components. Heating the matrix to the melt temperature of the polyethylene sheath, but below that of the polypropylene core causes the fibre-to-fibre bond at every contact point. And the high degree of fibre-to-fibre bonding provides a rigid structure that eliminates the need for a core support along with any possibility of media migration.

Applications:

  • Coatings – high quality paint, film coatings, resins, and ink.
  • General industrial – desalination, plating, machine tool coolant, process water.
  • Electronics – pre-RO, wafer slurries, ceramic slurries, chemical mechanical polishing, disc cleaning.
  • Chemical/petro-chemical – process water, pre-RO, amine, fine chemicals.

The rigid construction advantage
To meet demanding filtration quality standards in today’s market, absolute ratings will provide you with product consistency, and improve yields.

The rigid filter structure retains consistent pore size even under severe process conditions. Changes caused by pump fluctuations, stopping and restarting the system, or high differential pressure will have minimal, if any effect on product consistency. Depth filtration reduces deformable contaminants to help eliminate rework or product quality rejection.

Critical to any filtration process is the reduction of filter by-pass. We effectively address this issue by design with our closed-cell polyethylene foam gasket to properly seal the cartridge for applications using knife-edge housing systems.

Minimising flow restriction can dramatically reduce filtration cost. Lower pressure drops mean increased filter life, product throughput, and permit the use of fewer filters to achieve a given flow vs. differential pressure. When filters are appropriately sized for a specific application they reduce total filtration costs including purchase, installation, and disposal.

Kontakt os

Send en besked til os

Tak for din anmodning til 3M. De oplysninger, du giver på denne formular, vil blive brugt til at svare på din anmodning via e-mail eller telefon af en 3M repræsentant eller af en af ​​vores autoriserede forretningspartnere, med hvem vi muligvis deler dine personlige oplysninger i overensstemmelse med 3M's privatlivspolitik.

  •  
  •  
  •  
  •  
  •  
  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.

  • Send besked

Tak, fordi du kontaktede 3M

Vi har modtaget din besked og undersøger nu din forespørgsel
En af vores repræsentanter vil kontakte dig via telefon eller e-mail

An error occurred.